The perfect performance improvement for modern engines
Experience our innovative bestseller, the Pro 2.
Commanding power down the straights and exciting acceleration out of the bends: if that's what you’re after, you'll love our bestseller, the RaceChip Pro 2. The driving experience in your car is more intense and emotive throughout the rev range with clearly improved power and more torque. In certain situations there can even be an active safety advantage to having greater power reserves.
The RaceChip Pro 2 offers an overall package that you'll love. With premium components, our latest software specially designed for your car and a comprehensive service package that includes a 5-year product warranty. And all of this for a price that offers unbeatable value for money.
Best in class – your benefits from the Pro 2
- +25% more
power and torque
- Simple installation
Of course, the Pro 2 also has all the other qualities that distinguish RaceChip. The optimisation software is fine-tuned specifically to your engine through a series of examinations and test runs.
Our Engine Protect System ensures that the performance upgrade is always kept within your engine's RPM tolerance range. Of course, we also use only the highest quality hardware components.
+25% power and torque
The tuning software in the Pro 2 is specially designed for your car to optimise your engine's electronic signals. This provides a significant boost to the horsepower and torque within the available power reserves. You'll enjoy added power, dynamics and mid-range acceleration.
Better fuel economy
RaceChip Pro 2 increases power while helping you save fuel and money. Savings of up to one litre per 100 kilometres are possible. Torque optimisation is the key to this success. The equation is pretty simple: more torque = earlier upshifts = reduced fuel consumption = lower costs.
1-year engine warranty
We have 100% confidence in the quality of the Race Chip Pro 2. Your benefit is the RaceChip engine warranty, which covers all the major engine and powertrain components, so you’ll always be on the safe side.
The RaceChip engine warranty is available in the following countries: Austria, Belgium, Denmark, Finland, Germany, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
5-year product warranty
We use only premium components in the Pro 2. The entire circuit board is covered in nano-coating and the processor was specially designed for the operating conditions found in an engine bay. The housing is heat-resistant, and the connection is made with a high-grade FCI plug. The Pro 2 is a high quality product, which is why we offer a 5-year product warranty.
Simple installation and removal
You don't have to be an expert to install the One. Easy do-it-yourself installation in just a few minutes – that's the RaceChip Plug&Drive promise. It lets you use the most sophisticated technology with the utmost ease.
A milestone in chip tuning – Our Pro series
Benefit from unbeatable value for money with the RaceChip Pro 2
A milestone in chip tuning - Our pro series
Benefit from unbeatable value for money with the RaceChip Pro 2
Components you’d otherwise only see in the premium chip tuning segment: heat resistant, fiberglass housing, a circuit board covered with nano-coating technology for optimal moisture protection, and a special FCI plug from the automotive engineering sector.
You’ll get these premium hardware components with the RaceChip Pro 2 together with the latest version of the RaceChip optimisation software at an attractive price offering great value for money. Make the most of your car’s power reserves but make no compromises.
is part of the package.
Warranty for performance chip and engine+
With the RaceChip Pro 2 you'll receive a 1-year engine warranty that covers all major components in your engine and powertrain. The chip itself comes with a 5-year product warranty.
Engine Protect System+
Our optimisation software ensures that the RaceChip works only within your engine’s safe rev range. When you get close to the red line or go into the red, the chip automatically shuts down so that your engine is running in stock condition again. As soon as the revs drop, the chip turns on again. Our Engine Protect System is that simple and safe. And it works in addition to any existing protection systems installed by the manufacturer.
Premium hardware components+
We use only premium components in the Pro 2. The entire circuit board is covered in nano-coating and the processor was specially designed for the operating conditions found in an engine bay. The housing is heat-resistant, and the connection is made with a high-grade FCI plug.
- Latest version of the vehicle-specific optimisation software
- Software performance parameters can be set manually
- Engine Protect system
- N/A Mhz processor
- Professional automobile safety plug
- PCB with nano water protection
- L: 9,2 × B: 10,4 × H: 3,6
PreparationFirst, open the bonnet and remove the engine cover as shown in the example for the VW Passat (B8) 2.0 TDI with 110kW.
Locating the connection in the engine bayOnce the wiring harness is connected, the entire setup should look like the image below. The RaceChip wiring harness is connected to the sensors at the points marked A and B.
Connection to the common rail sensor (A)First, the connection to the common rail sensor (A) needs to be made. Pull out the plug by its sensor. Note: only pull on the plug, never the cable.
Common rail sensor (A)Here you can see the disconnected plug of the common rail sensor (A), as well as the corresponding mating part on the wiring harness of your chip.
Connecting the wiring harnessNow connect the disconnected plug (A) to the corresponding socket on the wiring harness. Make sure that the plugs have engaged.
Connection to the common rail sensor (A)Connect the second plug of this wiring harness arm to the common rail sensor (A) so that it engages.
Connection to the turbo-boost pressure sensor (B)Next, the connection to the turbo-boost pressure sensor (B) needs to be made. Pull out the plug by its sensor.
Turbo-boost pressure sensor (B)The image above shows the disconnected plug of the turbo-boost pressure sensor (B), as well as the section of the RaceChip wiring harness that has not yet been used.
Connecting the wiring harnessConnect the disconnected plug (B) to the corresponding socket on the RaceChip wiring harness. Ensure that the plugs engage properly.
Connection to the turbo-boost pressure sensor (B)Connect the remaining plug on the wiring harness to turbo-boost pressure sensor (B). Push it into the mating piece so that it engages.
Connecting the RaceChip Pro 2Your engine is about to get more power. Connect the RaceChip Pro 2 to the FCI connector of the wiring harness.
Final stepsSecure the cable and the Pro 2 at a suitable point in your engine bay and then fasten the cover. All done! Now have fun driving!